• Lightweight compact size and simple two piece construction.
|
• The probe tip and narrow nose are in line with mounting feature allowing the gage head to fit into smll inside diamters.
|
| • The rotational axis of the gage head utilizes a pivot bearing and slip clutch design assuring stability and repeatability during setup and measurement. |
• The slip cluth design allows the probe tip to be swiveled along a 200° arc.
|
• Convenient, easy to use probe bias know located on the side of the gage tip reverses sensing direction also allowing temporary probe tip force adjustment.
|
| • A micro adjustment knob at the back of the gage head makes probe tip adjustments easy for quick part setups. |
• Utilizes an LVDT transducer to achieve ultra precision performance.
|
| • Connects directly to all Precitech electronic amplifiers and computer interface modules. |
| e |
Mechanical |
|
Electrical |
|
|
|
| Concept |
Pivot Lever Type |
|
Transducer Type |
Linear Variable Differential Transformer |
| Gaging Range |
±0.010" (±0.25mm) |
|
Linear Range |
±0.010" (±0.25mm) |
| Overtravel |
0.005" (0.125mm) |
|
Non-Linearity |
<=0.3% F.S. (Best fit line by least squares) |
| Total Travel |
0.030" (0.75mm) |
|
Excitation |
3.0 Vrms @ 10 Khz |
| Gaging Force |
0.18oz (5gm), bi-directional |
|
Output Sensitivity |
7.1mV/V/0.001" ±10% |
| Rate of Change of Force |
<0.003oz/.001" (.1gm/.025mm) |
|
Null Voltage |
<5mV |
| Probe Angle Adjustment |
200° (3.5rad) |
|
Phase Shift |
+25° @ 10 Khz 0° @ 19Khz |
| Probe Length |
1.25" (32mm) |
|
Polarity |
Output voltage (red) in phase with input voltage (yel) when core is past null toward leads end |
| Probe Tip |
0.062" (1.6mm) dia. Ruby Tip |
|
Input Impedance |
100Ω ±10% |
| Fine Adjustment Range |
0.250" (6.35mm) |
|
Output Impedance |
120Ω each ±10% 240Ω, total ±10% |
| Probe Slipclutch Breakaway |
3.5±.7oz. (100±20gms) |
|
Input Resistance |
44Ω ±10% |
| Weight |
2.8oz (78gm) |
|
Output Resistance |
84Ω each ±10% |
|
|
|
Cable |
6' (2m) long |
