| System / Control |
Description |
| Configuration |
Three, linear-axis freeform machining system |
| Control System |
Precitech Ultrapath™ DSP based machine control system |
| Base |
Epoxy polymer granite supported in a fabricated steel frame |
| Vibration Isolation |
Acitve leveling vibration isolation with attenuation above 3Hz |
| Machine Slides |
X, Y and Z Axes |
| Type |
Preloaded high stiffness box-type hydrostatic oil bearing design |
| Travel |
X, 350mm (13.8") Z, 250mm (9.8") Y, 150mm (5.9") |
| Speed |
X & Z, 1000mm/min (40"/min) Y, 500mm/min (20"/min) |
| Drive System |
Linear AC Synchronous motor |
| Machines Spindles |
SP90 (machining) |
SP150 (workholding) |
| Type |
Air bearing |
Air bearing |
| Speed Range |
500-10,000 RPM |
10-5,000 RPM |
| Stiffness (offset radial) |
26N/µm @ 80PSI (150,000lbs/inch) |
88N/µm @ 80PSI (500,000lbs/inch) |
| Load Capacity |
19 Kg (40lbs) |
57 Kg (125lbs) |
| Machine Requirements |
| Power |
230VAC/3.5KVA 1 phase 50/60 Hz |
| Air |
7 liters/sec. (15SCFM@100PSIG 0.6MPA) |
| Weight/Floor Space |
5000 lbs. / 3100mm x 2800mm x 2150mm (122" x 110.2" x 85.6") |
