| System / Control |
Description |
| Configuration |
Multi-axis linear flycutting/grooving machining system |
| Control System |
Precitech Ultrapath™ DSP based machine control system |
| Base |
Natural granite supported in a fabricated steel frame |
| Vibration Isolation |
Pneumatic isolation mounts |
| Machine Slides |
X and Y axes |
Z Axis |
| Type |
Hydrostatic oil bearing design |
Cross needle roller bearing design |
| Travel |
X-axis 660mm (26")
Y-axis 600mm (24") |
95mm (3.75") |
| Speed |
0.001-720mm/min |
0.001-720mm/min |
| Drive System |
Linear AC Synchronous motor |
DC brush type |
| Positioning (C) Axis |
| Type |
Hydrostatic bearing design with integral motor and encoder |
| Speed Range |
2 RPM max |
| Position Accuracy |
±1.5 arc second |
| Load Capacity |
500Kg (1,100lbs) |
| Table Diameter |
450mm (18") diameter |
| Machine Requirements |
| Power |
230VAC/1.5KVA 1 phase 50/60 Hz |
| Air |
8SCFM@80PSIG 3.8 l/s @5.6 bar |
| Floor Space |
2896mm x 1829mm x 1778mm (114" x 72" x 70 ") |
