| System / Control |
Description |
| Configuration |
Two-axis contouring machine, inverted "T" configuration |
| Control System |
Pentium 233, 32MB RAM (min.) 1GB HD (min.) 3.5" floppy drive and a flat panel touch screen includes remote on-line diagnostic capability Modem optional |
| Base |
Natural granite supported on a fabricated steel frame |
| Vibration Isolation |
Passive 3-point pneumatic vibration isolation |
| Integral Lens Design |
| Spherical |
Spherical, Aspherical, and Toric w/ Variform™ |
| Machine Slides |
X and Z Axes |
| Type |
Preloaded hydrostatic oil bearing design |
| Travel |
X axis 190mm (7.5"), Z axis 100mm (4") |
| Speed |
0.001-3000mm/min (120"/min) |
| Drive System |
Linear AC Synchronous motor |
| Workholding Spindle |
Heavy Duty Spindle |
| Type |
Air bearing |
| Speed Range |
2,000-15,000 RPM |
| Acc/Dec Time |
Less than 5 seconds |
| Swing Capacity |
25mm (1") w/ collets 50mm (2") w/ vacuum chuck |
| Workpiece Chucking |
Air actuated collet mechanism |
| Machine Requirements |
| Power |
230VAC, 1 phase 50/60 Hz, 3.0 Kva max |
| Air |
6SCFM@90PSIG, 3l/s @ 6 bar |
| Floor Space |
1300mm x 1050mm (51" x 41") |
